Radio Shack 43-3857 Owner's Manual page 18

18
The screen appears with the memory location
number that you have selected in the display.
3. Press or
MEM
4. Press or
VOL
MemoryXX
. Then press
.
SELECT
Store Name
indicating that the display is ready for the name
to be edited. When a name has not been
stored, the cursor appears at the beginning of
the second line.
5. Use the number keys,
to edit the name. (See "Storing Phone
DELETE
Numbers and Names" on page 13.) To edit only
the phone number, skip this step.
6. Press or
MEM
The cursor flashes indicating that the display is
ready for the number to be edited.
7. Use the number keys,
or
REDIAL CH/DELETE
number.
The phone number cannot exceed 20 digits.
If you don't want to change the phone number,
skip this step.
8. Press or
MEM REMOTE/SELECT
either name or phone number, a confirmation
display shows up. If it is correct, press
Yes
to select and press
hear a confirmation tone. The memory storage
is complete.
For example, if you store a name and number
into memory location number 01, the display
Memory01 Stored
shows
seconds, Select Memory screen is displayed.
9. Press to return to standby mode.
END
.
REMOTE/SELECT
to select
VOL
or
MEM
is displayed. The cursor flashes
/TONE/<
.
REMOTE/SELECT
/TONE/<
to edit the phone
. If you changed
REMOTE/SELECT.
. After about two
Edit
REMOTE/
, #/ , or
> CH/
, #/ ,
> PAUSE/
VOL
You