Caller Id; When The Telephone Rings - Radio Shack 43-3857 Owner's Manual

4. Press
VOL
5. Press
REMOTE/SELECT
6. You hear a confirmation tone. After about two
seconds, the handset returns to standby mode.

CALLER ID

You must subscribe to Caller ID service to use
this feature.
When the telephone rings, the Caller ID feature
allows you to view the caller's name and phone
number on the display before you answer the
phone.
The handset displays the phone number of the
incoming call, the name, and time. Additionally, you
can dial the displayed number and store the
information for memory dialing. Make sure you have
turned on the Caller ID on Call Waiting feature.
(See "Changing the Auto Talk and CIDCW" on page
9.)
W T
HEN THE
1. When the Caller ID message is received, the
display shows the caller's phone number along
with the date and time. The incoming call
information is stored in the Caller ID record. If
the Caller ID service includes the caller's name,
the caller's name appears on the display (up to
15 letters).Ô
You may receive any one of the following
messages:
Message
When invalid data is
received
When a private name
is received
to move the pointer to
or
CH/DELETE
R
ELEPHONE
Display
"Incomplete Data"
"Private Name"
Yes
.
.
INGS
Ô Ô
NOTES
• If you answer a call
before the Caller ID
message is received
(Example: before the
second ring), the Caller
ID message will not
appear.
• When the call is
received via a telephone
company that does not
offer Caller ID service,
the caller's phone
number and name do
not appear.
(This includes
international calls.)
• When the call is via a
private branch exchange
(PBX), the caller's phone
number and name may
not appear.
• Data errors appear as " ".
21