Table of Contents
Advertisement
Your telephone connects directly to a modular
telephone line jack. If your telephone wiring does
not have a modular jack, you can update the wiring
yourself using jacks and adapters (available at your
local RadioShack store or online at
RadioShack.com), or have the telephone company
update the wiring for you. You must use compatible
modular jacks that are compliant with Part 68 of
FCC Rules. The USOC number of the jack to be
installed is RJ11C (RJ11W for a wall plate).
On a Desk Top
1. Plug one end of
the supplied long
modular cord into
the
TEL LINE
on the base's
back.
2. Plug the modular
cord's other end
into a modular
telephone line jack.
3. Insert the supplied AC adapter's barrel plug
into the
DC IN 9V
4. Route the adapter's cord through the hook on
the back.
5. Plug the adapter into a standard AC outlet.
C
ONNECTING
R
EPLACING THE
The phone comes with a rechargeable Ni-Cd
(nickel-cadmium) battery pack installed in the
handset, but not connected. Before using your
phone, you must connect the battery pack. Then
charge it for about 24 hours.
1. Press down and slide off the battery pack
compartment cover.
jack
jack on the back.
, C
HARGING AND
B
ATTERY
!
The EPA
certified
RBRC
Recycling Seal
on the nickel-
cadmium (Ni-Cd) battery
indicates RadioShack is
voluntarily participating in
an industry program to
collect and recycle these
batteries at the end of their
useful life, when taken out
of service in the United
States or Canada. The
RBRC program provides a
convenient alternative to
placing used Ni-Cd
batteries into the trash or
the municipal waste stream,
which may be illegal in your
P
area. Please call 1-800-
ACK
THE-SHACK (1-800-843-
7422) for information on Ni-
Cd battery recycling and
disposal bans/restrictions in
your area. RadioShack's
involvement in this program
is part of the company's
commitment to preserving
our environment and
conserving our natural
resources.
CAUTION
You must use a
!
Class two power
source that supplies
9V DC and delivers at least
350 mA. Its center tip must
be set to positive and its
plug must fit the phone's
jack. The supplied
IN 9V
adapter meets these
specifications. Using an
adapter that does not meet
these specifications could
damage the phone or the
adapter.
!
IMPORTANT
®
Battery
DC
!
7
Advertisement
Table of Contents
