Setting The Day And Time - Radio Shack TAD-728 Owner's Manual

43-728.fm Page 30 Thursday, August 26, 1999 8:53 AM
PREVIOUS
2. Repeatedly press
on the base until the TAD
SKIP
announces and displays the number
of rings you desire – "two" so the
TAD answers on the second ring,
"five" to answer on the fifth ring, or
"toll saver" when you want to use
the toll-saver function.
3. Press
ANSWER
. The TAD sounds a long beep
and announces the selected num-
ber of rings. The TAD repeats the
selected number of rings or toll
saver every 3 seconds until 30 sec-
onds have passed.
Note: Press each button within 30 sec-
onds. If you take longer, the setting pro-
cedure is canceled automatically.
SETTING THE DAY
AND TIME
You must set the day and time so the
TAD can record the correct day and time
of each message.
1. If is on, press
ANSWER
off the TAD.
2. Hold down on the base until a
STOP
long beep sounds.
announces the day of the week.
flashes on the digital display.
30
ANSW ER
DELETE
PLAY/REPEAT
SKIP
STOP
or
PREVIOUS
or
PLAY/REPEAT/
to turn
STOP
The TAD
CL
3. Press
PREVIOUS
TAD announces the correct day of
the week.
4. Press
PLAY/REPEAT/
announces the hour and "AM" or
"PM."
5. Press
PREVIOUS
TAD announces the correct hour,
including AM or PM.
6. Press
PLAY/REPEAT/
announces the minute.
7. Press
PREVIOUS
TAD announces the correct minute.
Holding down
PREVIOUS
advances the minute rapidly and
announces minutes in 10 minute
increments. Release
and the TAD announces the
SKIP
minute setting. If you advance too
far when holding down
, press the opposite button.
SKIP
8. Press
PLAY/REPEAT/
minute setting. The TAD announces
the newly set day and time.
Notes:
• If you make an error, the TAD beeps
3 times. Repeat Steps 1–7.
• The TAD repeats the stage every 3
seconds for 30 seconds. After 30
seconds, the setting procedure is
canceled automatically.
• When you have an incoming call or
paging from the base while setting
the day and time, the setting proce-
dure is canceled.
or until the
SKIP
. The TAD
or until the
SKIP
. The TAD
or until the
SKIP
or
SKIP
or
PREVIOUS
or
PREVIOUS
to enter the