Radio Shack 43-3857 Owner's Manual page 39

Remote access with the handset
You can operate your answering system from
another room using a handset. Ô
1. With the phone in standby mode, press
REMOTE/SELECT
AnsweringMachine operation
on the display. The answering system
announces the current time and the number of
messages stored in the memory.
2. You hear "To play incoming message, press
For help, press
3. Enter a command within 15 seconds. You may
select a command from the following chart:
Command
/1 Repeat a Message
/2 Play Incoming Messages
/3 Skip a Message
/4 Delete a Message
/5 Stop Operation
6 Answering System On
9 Answering System Off
0 Voice Prompts
4. After the command has finished, you hear
intermittent beeps indicating that the system is
in the command waiting mode. You may enter
another command at this time from the chart on
step 3.
5. When you are finished, press
system. The answering system automatically
returns to standby.
on the handset.
." You hear intermittent beeps.
0
Function
END
• If you press
Remote
appears
• If the base is not
.
2
• The base's keypad is
• If you receive a call, the
• During the remote
• If you have new
to exit the
Ô Ô
NOTES
before
END
the base is connected,
the phone will return to
standby.
connected within five
seconds, you hear
beeps and the phone will
return to standby.
disabled during remote
operation.
remote operation is
canceled.
operation [ -- ] appears
on the base.
messages and old
messages, only the new
messages will be
played. After you have
reviewed your new
messages, you can play
your old messages by
pressing again.
/2
39