Olivetti DP-670 Service Manual page 50

3K5
Maintenance
item No.
U411 3. Press [INPUT].
Display
INPUT
4. Press the start key. Auto adjustment starts.
When automatic adjustment has normally completed, [RESULT OK 00] is displayed. If a problem
occurs during auto adjustment, [ERROR XX] (XX is replaced by an error code) is displayed and opera-
tion stops. Should this happen, determine the details of the problem and either repeat the procedure
from the beginning, or adjust the remaining items manually by running the corresponding maintenance
items.
5. To return to the screen for selecting an item, press the stop/clear key.
Error Codes
Codes
ERROR 01
ERROR 02
ERROR 03
ERROR 04
ERROR 05
ERROR 06
ERROR 07
ERROR 08
ERROR 09
ERROR 0a
ERROR 0b
ERROR 0c
ERROR 0d
ERROR 0e
ERROR 0f
ERROR 10
ERROR 11
ERROR 12
ERROR 13
ERROR 14
ERROR 15
ERROR 16
ERROR 17
ERROR 18
ERROR 19
ERROR 1a
ERROR 1b
ERROR ff
ERROR 65
Completion
Press the stop/clear key. The screen for selecting a maintenance item is displayed.
1-3-30
Description
Automatic adjustment of first page using the DP for: original size magnifica-
tion/leading edge timing/center line
Description
Black band detection error (scanner leading edge registration)
Black band detection error (scanner center line)
Black band detection error (scanner main scanning direction magnification)
Black band is not detected (scanner leading edge registration)
Black band is not detected (scanner center line)
Black band is not detected (scanner main scanning direction magnification)
Black band is not detected (scanner auxiliary scanning direction magnification)
Black band is not detected (DP main scanning direction magnification far end)
Black band is not detected (DP main scanning direction magnification near end)
Black band is not detected (DP auxiliary scanning direction magnification leading
edge)
Black band is not detected (DP auxiliary scanning direction magnification leading
edge original check)
Black band is not detected (DP auxiliary scanning direction trailing edge)
Black band is not detected (DP auxiliary scanning direction trailing edge 2)
DMA time out
Auxiliary scanning direction magnification error
Auxiliary scanning direction leading edge detection error
Auxiliary scanning direction trailing edge detection error
Auxiliary scanning direction skew 1.5 error
Maintenance request error
Main scanning direction center line error
Main scanning direction skew 1.5 error
Main scanning direction magnification error
Carriage error
Service call error
DP status error
DP open error
Original is not detected
Other error
Memory over error
Description
Service Manual Y108671-9