Olivetti DP-670 Service Manual page 48

3K5
Maintenance
item No.
Adjusting margins for scanning an original from the DP
U404
Description
Adjusts margins for scanning the original from the DP.
Purpose
Make the adjustment if margins are incorrect when the DP is used.
Caution
Before making this adjustment, ensure that the following adjustments have been made in maintenance mode.
U402
(See the service manual
for the machine.))
Adjustment
1. Press the start key.
2. Select the item to be adjusted.
Display
A MARGIN
B MARGIN
C MARGIN
D MARGIN
3. Press the interrupt key.
4. Place an original on the DP and press the start key to make a test copy.
5. Press the interrupt key.
6. Change the setting value using the cursor up/down keys.
Increasing the value makes the margin wider, and decreasing it makes the margin narrower.
7. Press the start key. The value is set.
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.
1-3-28
Description
U403
(See the service manual
for the machine.)
Description
Left margin
Leading edge margin
Right margin
Trailing edge margin
Leading edge margin
(3±1.5 mm)
Left margin
(2±1.0 mm)
Trailing edge margin
(2±1.0 mm)
Figure 1-3-11
Service Manual
U404
Setting Initial Change in
range setting value per step
0 to 10.0 3.0 0.5 mm
0 to 10.0 2.5 0.5 mm
0 to 10.0 3.0 0.5 mm
0 to 10.0 4.0 0.5 mm
Right margin
(2±1.0 mm)
Y108671-9