Display - HP ENVY 17m Maintenance And Service Manual

Display

Description
Hinge-up Kit
HU LCD 17.3 FHD AG UWVA (Touch screen)
HU LCD 17.3 FHD AG UWVA
LCD 17.3 UHD AG UWVA with bezel
Hinge covers
IMPORTANT:
replacement
Before removing the display panel, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the base
5. Remove the battery (see
6. Remove the following components:
a. Base enclosure (see
b. Battery (see
Remove the display assembly:
▲ Remove three screws from each hinge bracket (1), turn the display assembly over (2), and then lift the
display to remove it (e).
Make special note of each screw and screw lock size and location during removal and
enclosureBase enclosure on page
Battery on page
Base enclosure on page
Battery on page
26).
28).
26).
28).
Spare part number
925547-001
935938-001
935939-001
933394-001
Component replacement procedures 29