Input/Output Brackets - HP ENVY 17m Maintenance And Service Manual

Input/output brackets

Description
Bracket, right input/output
Bracket, left input/output
IMPORTANT:
replacement
Before removing the Input/out brackets, follow these steps:
1. Shut down the computer.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the following components:
a. Base enclosure (see
b. Battery (see
c. Hard drive (see
d. Solid-state drive (see
e. Memory (see
f. WLAN module (see
g. Optical drive (see
Remove the left input/output bracket:
1. Remove 1 screw (1).
Make special note of each screw and screw lock size and location during removal and
Base enclosure on page
Battery on page
Hard drive on page
Solid-state drive on page
Memory on page
WLAN module on page
Optical drive on page
26).
28).
31).
33).
35).
37).
39).
Spare part number
925462-001
925463-001
Component replacement procedures 41