Speed Dial Locations - AT&T EL51200 User Manual

Directory

Speed dial locations

To assign or reassign a speed dial location to a directory entry
While reviewing the directory, you can use the steps in To edit a directory entry
on page 33 to assign or reassign a speed dial location to a directory entry.
You can also follow the steps below to use the main menu to assign or
reassign a speed dial location to a directory entry.
1. Press MENU/
2. Press or
DIR
/SELECT.
MENU
3. Press or
DIR
/SELECT.
MENU
4. To assign a speed dial location, press
to an empty speed dial location.
-OR-
To reassign another speed dial location, press
to scroll to another speed dial location.
5. Press /SELECT to show the directory.
MENU
6. Press or
DIR
the desired entry.
-OR-
Use the alphabetical search to find the desired entry. Refer
to steps 2 and 3 in To search by name on page 31.
7. Press /SELECT to confirm. The name (up to 12
MENU
characters) of the desired directory entry appears in the
selected speed dial location.
8. Press OFF/
4-7 to fill in other speed dial locations.
NOTES:
• If the directory is empty, when you press
DIRECTORY EMPTY.
• If the speed dial location you selected is occupied, the new directory entry you selected
replaces the old one. Take caution not to replace entries you do not wish to delete from the
speed dial locations.
in idle mode.
SELECT
to scroll to >DIRECTORY. Press
CID
to scroll to >SPEED DIAL. Press
CID
to browse through the directory and find
CID
to return to idle mode or repeat steps
CLEAR
or
DIR CID
/SELECT in step 5, the screen shows
MENU
34
>SPEED DIAL
REVIEW
to scroll
>1: <EMPTY>
2: Robert Brown
or
DIR CID
Charlie Johnson
888-883-2445
>1: Charlie John
2: Robert Brown