Speed Dial Locations; To Assign Or Reassign A Directory Entry To A Speed Dial Location - AT&T EL51100 User Manual

Directory

Speed dial locations

To assign or reassign a directory entry to a speed dial location

Press MENU/
1.
2. Press or
DIR
/SELECT.
MENU
3. Press or
DIR
/SELECT.
MENU
4. To assign a speed dial location, press
to an empty speed dial location.
-OR-
To reassign a speed dial location, press
scroll to the desired speed dial location.
5. Press /SELECT to show the directory.
MENU
6. Press or
DIR
the desired entry.
-OR-
Use the alphabetical search to find the desired entry. Refer
to Steps 2 and 3 in To search by name on page 26.
7. Press /SELECT to confirm. The name (up to 12
MENU
characters) of the desired directory entry appears in the
selected speed dial location.
NOTES:
• If the directory is empty, when you press
DIRECTORY EMPTY.
• If the speed dial location you selected is occupied, the new directory entry you selected
replaces the old one. Take caution not to replace entries you do not wish to delete from the
speed dial locations.
in idle mode.
SELECT
to scroll to >DIRECTORY. Press
CID
to scroll to >SPEED DIAL. Press
CID
to browse through the directory and find
CID
or
DIR CID
or
DIR
/SELECT in Step 5, the screen shows
MENU
29
>SPEED DIAL
REVIEW
to scroll
>0: <EMPTY>
1: Robert Brown
to
CID
Charlie Johnson
888-883-2445
>0: Charlie John
1: Robert Brown