Battery Installation And Charging - AT&T EL51200 User Manual

Getting started

Battery installation and charging

Battery installation
Install the battery as shown below.
1. Plug the battery
connector securely
into the socket inside
the handset battery
compartment, matching
the color-coded label.
4. Charge the handset by placing it face up in
the telephone base or charger. The CHARGE
light is on when charging.
IMPORTANT INFORMATION:
Use only the supplied rechargeable battery or replacement battery (model BT8001). To order, visit
www.telephones.att.com
our website at
1 (866) 288-4268
In Canada, dial
2. Insert the supplied battery
with the label THIS SIDE
UP facing up as indicated.
, or call
.
8
3. Align the cover flat against
the battery compartment,
then slide it upwards until
it clicks into place.
To replace the battery, press the tab and
slide the battery compartment cover
downwards. Lift out the old battery and
disconnect it from the handset. Follow the
instructions above to install and charge the
new battery.
1 (800) 222-3111
.