Installation Install the telephone base close to a telephone jack and a power outlet not controlled by a wall switch. For optimum range and better reception, place the telephone base in a central and open location. If you subscribe to high-speed Internet service (digital subscriber line - DSL) through your telephone line, you must install a DSL filter between the telephone line cord and the telephone wall jack (see the following page).
Battery installation & charging Install the battery as shown on the next page. Once you have installed the battery, the screen indicates the battery status (see table below). If necessary, place the handset in the telephone base or charger to charge the battery. For best performance, keep the handset in the charger when not in use.
Page 4
Battery installation & charging CHARGE light Step 1 Step 2 Step 3 Plug the battery connector Align the cover flat Charge the handset by securely into the socket against the battery placing it face up in the inside the handset battery compartment, then telephone base or compartment, matching...
Telephone base & charger installation Install the telephone as shown below. The telephone base is ready for table use. 5. Plug the other end of the telephone If you have DSL high speed Internet service, a DSL filter line cord into a (not included) is required.
Page 6
Quick reference guide - handset CID/VOLUME Press CID to show caller ID CHARGE light information when the phone is The charge light is on when the not in use. handset is charging. Press to scroll down while in menus. Press VOLUME to DIR/VOLUME decrease the volume level...
Quick reference guide - handset & telephone base Main menu > Highlights a menu item Main menu Using menus DIRECTORY Press DIR or CID to scroll ?EJSFDUPSZ CALL LOG through menu items. DBMM!MPH RINGER VOLUME Press /SELECT to select or MENU RINGER TONE modify a highlighted item.