Straight And Circular Machining; Straight Milling - Siemens SINUMERIK 840D sl Operating Manual

Parameter
T
D
F
S / V
α1
Other M function
Zero offset
14.5.3

Straight and circular machining

14.5.3.1

Straight milling

Use this function for simple, straight machining (e.g. face or longitudinal turning).
Procedure
Milling
Operating Manual, 03/2013, 6FC5398-7CP40-3BA1
Description
Tool name
Cutting edge number
Feedrate
Spindle speed or constant cutting rate
Rotation of the coordinate system
Input of machine functions
Refer to the machine manufacturer's table for the correlation between the meaning
and number of the function.
Selecting the zero offset.
1. "Manual Machine" is active.
2. Press the "Straight Circle" softkey.
3. Select the desired straight machining and press the "Straight all axes"
softkey
- OR -
Press the "Straight X α" softkey.
- OR -
Press the "Straight X α" softkey.
4. Specify the desired value for the feedrate F.
- OR -
Working with Manual Machine
14.5 Simple workpiece machining
Unit
mm/min
mm/rev
rev/min
m/min
Degrees
655