Siemens SINUMERIK 840D sl Operating Manual page 310

Programming technological functions (cycles)
8.1 Drilling
6. Retraction with G0 to the safety clearance of the reference point.
7. Retraction to retraction plane with G0 to drilling position in the two axes of the plane
Procedure
Parameters, G code program
PL Machining plane
RP Retraction plane
SC Safety clearance
Parameter Description
Machining
Single position
•
position (only
Drill hole at programmed position
for G code)
Position pattern
•
Position with MCALL
Z0 (only for G Reference point Z
code)
DIR Direction of rotation
(only for G
•
code)
•
Z1 Drilling depth (abs) or drilling depth in relation to Z0 (inc)
DT
Dwell time at final drilling depth in seconds
•
Dwell time at final drilling depth in revolutions
•
SPOS Spindle stop position
310
(coordinates of the hole center point).
1. The part program or ShopMill program to be processed has been
created and you are in the editor.
2. Press the "Drilling" softkey.
3. Press the "Boring" softkey.
The "Boring" input window opens.
mm
mm
Parameters, ShopMill program
T Tool name
D Cutting edge number
F Feedrate
S / V Spindle speed or constant
cutting rate
Operating Manual, 03/2013, 6FC5398-7CP40-3BA1
mm/min
mm/rev
rpm
m/min
Unit
mm
mm
s
rev
Degrees
Milling