Siemens SINUMERIK 840D sl Operating Manual page 536

Tool management
11.5 Tool list
References
Information on the configuration and setting up of the tool list can be found in the following
references:
Commissioning Manual SINUMERIK Operate (IM9) / SINUMERIK 840D sl
Icons in the tool list
Icon/
Marking
Tool type
Red "X"
Yellow triangle pointing
downward
Yellow triangle pointing
upward
Green border
Magazine/location number
Green double arrow
Gray double arrow
(configurable)
Red "X"
Procedure
See also
Displaying tool details (Page 564)
Changing a tool type (Page 567)
536
1. Select the "Parameter" operating area.
2. Press the "Tool list" softkey.
The "Tool List" window opens.
Meaning
The tool is disabled.
The prewarning limit has been reached.
The tool is in a special state.
Place the cursor on the marked tool. A tooltip provides a
short description.
The tool is preselected.
The magazine location is positioned at the change position.
The magazine location is positioned at the loading position.
The magazine location is disabled.
Operating Manual, 03/2013, 6FC5398-7CP40-3BA1
Milling