Siemens SINUMERIK 840D sl Operating Manual page 24

Introduction
1.2 Operator panel fronts
24
<Cursor up>
• Editing box
Moves the cursor into the next upper field.
• Navigation
– Moves the cursor in a table to the next cell upwards.
– Moves the cursor upwards in a menu screen.
<Cursor up> + <CTRL>
• Moves the cursor in a table to the beginning of the table.
• Moves the cursor to the beginning of a window.
<Cursor up> + <SHIFT>
In the program manager and in the program editor, selects a
contiguous selection of directories and program blocks.
<Cursor down>
• Editing box
Moves the cursor downwards.
• Navigation
– Moves the cursor in a table to the next cell downwards.
– Moves the cursor in a window downwards.
<Cursor down> + <CTRL>
• Navigation
– Moves the cursor in a table to the end of the table.
– Moves the cursor to the end of a window.
• Simulation
Reduces the override.
<Cursor down> + <SHIFT>
In the program manager and in the program editor, selects a
contiguous selection of directories and program blocks.
<SELECT>
Switches between several specified options in selection drop-down
list boxes and in selection boxes.
Activates checkboxes.
In the program editor and in the program manager, selects a
program block or a program.
Operating Manual, 03/2013, 6FC5398-7CP40-3BA1
Milling