Additional Data - Siemens SINUMERIK 840D sl Operating Manual

11.5.1

Additional data

The following tool types require geometry data that is not included in the tool list display.
Tools with additional geometry data
Tool type
111 Conical ballhead cutter
121 End mill with corner
rounding
130 Angle head cutter
131 Angle head cutter with
corner rounding
140 Face milling
155 Bevel cutter
156 Bevel cutter with corner
rounding
157 Conical die-milling cutter
585 Calibration tool
710 3D-probe milling
712 Mono-probe
713 L-probe
714 Star-type probe
You can use the configuration file to specify the data to be displayed for specific tool types in
the "Additional Data" window.
Milling
Operating Manual, 03/2013, 6FC5398-7CP40-3BA1
Additional parameters
Corner radius
Corner radius
Geometry length (length X, length Y, length Z)
Wear length (Δ length X, Δ length Y, Δ length Z)
Adapter length (length X, length Y, length Z)
V (direction vector 1 - 6)
Vector X, vector Y, vector Z
Geometry length (length X, length Y, length Z)
Corner radius
Wear length (Δ length X, Δ length Y, Δ length Z)
Adapter length (length X, length Y, length Z)
V (direction vector 1 - 6)
Vector X, vector Y, vector Z
External radius
Tool angle
Taper angle
Corner radius
Taper angle
Taper angle
Geometry length (length X, length Y, length Z)
Wear length (Δ length X, Δ length Y, Δ length Z)
Geometry length (length X, length Y, length Z)
Wear length (Δ length X, Δ length Y, Δ length Z)
Geometry length (length X, length Y, length Z)
Wear length (Δ length X, Δ length Y, Δ length Z)
Geometry length (length X, length Y, length Z)
Wear length (Δ length X, Δ length Y, Δ length Z)
Boom length (length)
Geometry length (length X, length Y, length Z)
Wear length (Δ length X, Δ length Y, Δ length Z)
Outer diameter (∅)
Tool management
11.5 Tool list
537