Siemens SINUMERIK 840D sl Operating Manual page 251

Note
Switching between the help screen and the graphic view
The key combination <CTRL> + <G> is also available for the switchover between the help
screen and the graphic view.
Graphic view
The graphic view shows the contour of the workpiece as a dynamic graphic with broken
lines. The program block selected in the work plan is highlighted in color in the graphic view.
Figure 7-2
Milling
Operating Manual, 03/2013, 6FC5398-7CP40-3BA1
Graphic view of a ShopMill program
Creating a ShopMill program
7.1 Program views
251