Detaching And Refitting The Pf Lift Motors - Kyocera PF-740 Service Manual

(2) Detaching and refitting the PF lift motors

Procedure
1. Remove three screws and then remove
the rear cover. (seeP.1-5-7)
2. Remove each the connector.
3. Remove each three screws and then
remove the PF lift motor 1,2.
4. Check or replace the PF lift motor and
refit all the removed parts.
PF lift motor 1
Connector
Screws
Screw
1-5-13
PF lift motor 2
PF lift motor
Figure 1-5-21
3NF