Kyocera PF-740 Service Manual page 67

9. Remove the stop ring A and then
remove the one way clutch and PF
paper feed pulley (Right).
10. Remove the stop ring B and then
remove the PF forwarding pulley
(Right).
11. Remove the stop ring.
12. While pressing the retard release lever,
remove the PF separation pulley
(Right).
13. Clean or replace the PF forwarding pul-
ley (Right), PF paper feed pulley (Right)
and PF separation pulley (Right).
14. Refit the PF forwarding pulley (Right),
PF paper feed pulley (Right) and PF
separation pulley (Right) to the PF pri-
mary paper feed unit.
Feed gear
PF primary
paper feed
unit
Pickup gear
PF separation
pulley (Right)
Stop ring
1-5-5
PF paper feed
pulley (Right)
One way
clutch
PF forwarding
pulley (Right)
Stop ring B
Figure 1-5-6
Torque limiter
Retard
release lever
Figure 1-5-7
3NF
Stop
ring A