Kyocera PF-740 Service Manual page 24

7. Connect the connector of the cassette
heater to the connector in the rear
frame of the paper feeder.
8. Pass through the wire of the cassette
heater to three wire saddles.
9. Insert two hooks of the heater cover to
the holes of base of paper feeder each.
10. Install the heater cover by using a
screw.
Wire saddles
Wire saddle
Cassette heater
Screw
Hooks
1-2-8
Connector
Figure 1-2-10
Heater cover
Heater cover
Figure 1-2-11
3NF