Kyocera PF-740 Service Manual page 46

Item No.
U034 [LSU Out Top B/W] [LSU Out Top 3/4]
Display
MPT(L)
Cassette(L)
Duplex(L)
MPT(S)
Cassette(S) Paper feed from cassette
Duplex(S)
Large size: 218 mm or more in width of paper.
5. Change the setting value using the cursor +/- or numeric keys.
For output example 1, increase the value. For output example 2, decrease the value.
6. Press the start key. The value is set.
Remark
When changing the setting value of [Large] each item is modified, equal to amount of the value
which is changed adds also the value of [Small] each item and is pulled.
Caution
Check the copy image after the adjustment. If the image is still incorrect, perform the following
adjustments in maintenance mode.
U034
Description
Paper feed from MP tray
(when large size paper is used)
Paper feed from cassette
(when large size paper is used)
Duplex mode (second)
(when large size paper is used)
Paper feed from MP tray
(when small size paper is used)
(when small size paper is used)
Duplex mode (second)
(when small size paper is used)
Leading edge
registration
(20 ± 1.0 mm)
Correct image
U066
Description
Setting
range
-3.0 to 3.0
-3.0 to 3.0
-3.0 to 3.0
-3.0 to 3.0
-3.0 to 3.0
-3.0 to 3.0
Output
example 1
Figure 1-3-4
U071
1-3-20
Initial Change in
setting value per step
0 0.1 mm
0 0.1 mm
0 0.1 mm
0 0.1 mm
0 0.1 mm
0 0.1 mm
Output
example 2
3NF