Kyocera PF-740 Service Manual page 68

15. Refit the PF primary paper feed unit.
*: To reassemble, press and hold the retard
release lever at the bottom of the PF pri-
mary feed unit. (see P.1-5-5)
*: Align the pin at the far end vertical and
insert it into the coupling to fit the unit.
Retard release lever
Figure 1-5-8
1-5-6
Pin
Driving Coupler
PF primary
paper feed unit
PF primary paper feed unit
PF praimari paper unit
(Lower side)
3NF