Kyocera PF-740 Service Manual page 47

Item No.
U034 Adjustment: Center line adjustment
1. Press the system menu key.
2. Press the start key to output a test pattern.
3. Press the system menu key.
4. Select the item to be adjusted.
Display
MPT
Cassette1
Cassette2
Cassette3
Cassette4
Cassette5
Cassette6
Cassette7
Duplex
*: 45 ppm/55 ppm model only.
5. Change the setting value using the +/- keys or numeric keys.
For output example 1, increase the value. For output example 2, decrease the value.
6. Press the start key. The value is set.
Caution
Check the copy image after the adjustment. If the image is still incorrect, perform the following
adjustments in maintenance mode.
U034
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Description
Paper feed from MP tray
Paper feed from cassette 1
Paper feed from cassette 2
Paper feed from optional cassette 3
Paper feed from optional cassette 4
Paper feed from optional cassette 5
Paper feed from optional cassette 6
Paper feed from optional cassette 7
Duplex mode (second)
Center line of printing
(within ± 2.0 mm)
Correct image
U067
1-3-21
Description
Setting
range
-3.0 to 3.0
-3.0 to 3.0
-3.0 to 3.0
-3.0 to 3.0
-3.0 to 3.0
-3.0 to 3.0
-3.0 to 3.0
*
-3.0 to 3.0
*
-3.0 to 3.0
Output
example 1
Figure 1-3-5
U072
Initial Change in
setting value per step
0 0.1 mm
0 0.1 mm
0 0.1 mm
0 0.1 mm
0 0.1 mm
0 0.1 mm
0 0.1 mm
0 0.1 mm
0 0.1 mm
Output
example 2
3NF