Kyocera PF-740 Service Manual page 45

Item No.
U034 Adjustment: Leading edge registration adjustment
1. Press the system menu key.
2. Press the start key to output a test pattern.
3. Press the system menu key.
4. Select the item to be adjusted.
[LSU Out Top]
Display
MPT(L)
MPT Half(L) Paper feed from MP tray
Cassette(L)
Cassette
Half(L)
Duplex(L)
Duplex
Half(L)
MPT(S)
MPT
Half(S)
Cassette(S) Paper feed from cassette
Cassette
Half(S)
Duplex(S)
Duplex
Half(S)
Large size: 218 mm or more in width of paper.
Description
Paper feed from MP tray
(when large size paper is used)
(when large size thick paper is used)
Paper feed from cassette
(when large size paper is used)
Paper feed from cassette
(when large size thick paper is used)
Duplex mode (second)
(when large size paper is used)
Duplex mode (second)
(when large size thick paper is used)
Paper feed from MP tray
(when small size paper is used)
Paper feed from MP tray
(when small size thick paper is used)
(when small size paper is used)
Paper feed from cassette
(when small size thick paper is used)
Duplex mode (second)
(when small size paper is used)
Duplex mode (second)
(when small size thick paper is used)
1-3-19
Description
Setting
range
-3.0 to 3.0
-3.0 to 3.0
-3.0 to 3.0
-3.0 to 3.0
-3.0 to 3.0
-3.0 to 3.0
-3.0 to 3.0
-3.0 to 3.0
-3.0 to 3.0
-3.0 to 3.0
-3.0 to 3.0
-3.0 to 3.0
Initial Change in
setting value per step
0 0.1 mm
0 0.1 mm
0 0.1 mm
0 0.1 mm
0 0.1 mm
0 0.1 mm
0 0.1 mm
0 0.1 mm
0 0.1 mm
0 0.1 mm
0 0.1 mm
0 0.1 mm
3NF