Usb Dvr Access; Program Installation - Q-See Q25DVR4ES User Manual

2008/01/08
01 TIME
3
02 TIME
*
＞ ＞ ＞ ＞
03 TIME
04 TIME
*
05 MOTION
*
5
06 MOTION
07 MOTION
4
08 MOTION
(UP,DOWN) MOVE
(FF) SELECT MODE
1. Start Time.
3. TIME: Continuous record.
5. Un-played video recording.
Chapter 8: USB DVR Access -
1. Put the USB Driver Program CD in your CD-ROM Drive.
2. Open CD directory.
3. Double click on "Set up".
4. Run the install DVR Viewer program.
To Run the program Double click the program icon [
DVR Viewer will detect the hard drive automatically when user connects the USB
cable to PC.
NOTICE:
If the hard drive isn't detected, please restart and try the following:
1-Close the USB program window and remove the USB cable
2-Press [ ] then reconnect the USB cable to the PC and try again.
Q-See Q25DVR4ES User's Manual
SEARCH TIME
1
08:30:56
┅ ┅ ┅ ┅
2008/01/08
2008/01/08
2008/01/08
4
2008/01/08
2008/01/08
2008/01/08
2008/01/08
2008/01/08
(PLAY) PLAY
Page 18
2008/01/08
15:50:20
14:30:56
14:15:30
14:00:15
13:55:37
11:30:12
10:15:30
08:30:55
(MENU) EXIT
(SELECT) CHANGE
2. End Time.
4. MOTION: Motion Triggered event.

8.1 Program Installation

] on the desktop.
2
16:00:35