Camera Select; Record Select; Record Mode - Q-See Q25DVR4ES User Manual

Chapter 5: DVR Setup -
Chapter 5: DVR Setup -
Configure which channels are allowed to record.
Note: If no channels are selected, an error message will appear briefly on the screen
when record is selected.
Chapter 5: DVR Setup -
There are two modes of resolution for video recording:
1. Each Mode: The DVR compresses and records each video channel separately so
the user can enlarge a single channel to full screen display and still be recording on all
channels. You can also record on specific channels, for example, user can turn off the
record function of CH1 and CH2 and then the system will only record video on CH3 and
CH4.
Press [ CH1], [
playing back recorded video.
In Each Mode user can use the Loop Function.
Loop Function: When the system is in Live mode or Recording mode, press the
Q-See Q25DVR4ES User's Manual
CH2], [ CH3], [
Page 9

5.2 Camera Select

The DVR system can display 4
camera feeds in one picture (Quad
Mode).
Users can configure which
camera is displayed.
Press [ Select] to modify
setting and press [
CH2], [ CH3],[
each channel separately.
If the channel is disabled, the
system will display "OFF" on the
monitor.

5.3 Record Select

5.4 Record Mode

CH4] to switch between channels when
CH1], [
CH4] to set