Poor Jet Action; Water Is Too Hot; No Heat - Sundance Spas Hamilton Owner's Manual

780 series
Hide thumbs Also See for Hamilton:
Table of Contents

Advertisement

780 Series
14.4

Poor Jet Action

Make sure all jets are in the full open "on" position (page 28).
Press the JETS 1 button to make certain pump #1 is on.
Verify all air controls are in the "on" position (page 28).
Check for dirty filter. Clean, if necessary (Section 11.1, page 38).
14.5

Water is Too Hot

Reduce thermostat setting.
14.6

No Heat

1. Check thermostat setting.
2. Keep the hot tub cover in place while heating.
3. Check the settings to see if your hot tub is in economy mode (page
33).
Should checking the above steps fail to correct the problem, please call
your dealer so that they may arrange service. We build the best spas in
the industry. Nonetheless, we are always striving to improve the quality
and features of our products. Your input as a Sundance Spas hot tub
owner is a cherished part of this process. If you have any comments or
suggestions, or if you wish to be informed on any new products for your
hot tub, please write to us.
CONGRATULATIONS on your good taste and welcome to the happiest
and most relaxed family in the world!
Page 54

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

ChelseeMontclairDoverBristolHanover780 series

Table of Contents