Download Print this page

Setup And Adjustments - Johnson Controls T600MEP-2 Installation Instructions Manual

Programmable economizer thermostat

Advertisement

Setup and Adjustments

Thermostat Operation Overview
Thermostat Interface Keys
The T600MEP-2 interface consists of five keys on
the front cover and one configuration key
(Figure 7) that are accessed by removing the front
cover. Use the:
YES/SCROLL key to:
confirm menu selections, and to advance to
the next menu item
stop the Status Display Menu from scrolling
and to manually scroll to the next parameter
on the menu. When left unattended for
45 seconds, the display resumes scrolling.
NO key when you do not desire a parameter
change, and to advance to the next menu item
MENU key to access the Main User Menu or exit
the menu
UP/DOWN arrow keys to:
adjust values
activate a Temporary Setpoint
Backlit Liquid Crystal Display (LCD)
The T600MEP-2 uses a two-line, eight-character
display. Low-level backlighting is present during
normal operation, and it brightens when any user
interface key is pressed. The backlight returns to the
lower level when the thermostat is left unattended for
45 seconds.
4
T600MEP-2 Programmable Economizer Thermostat Installation Instructions
Backlit, plain text, Liquid
Crystal Display (LCD)
is easy to read in any
condition.
Five keys on the T600
make operation easy
and intuitive.
Figure 6: T600MEP-2 Thermostat Front Cover
Room Temp
75.0ºF
Light Emitting Diodes (LEDs)
indicate system activity.
Figure 7: Configuration Key Location
Light-Emitting Diodes (LEDs)
Three LEDs are used to indicate the status of the fan,
call for heat, or call for cooling. When:
the fan is on, the FAN LED lights up
heating is on, the HEAT LED lights up
cooling is on, the COOL LED lights up
Programming Overview
There are three menus used to view, program, and
configure the T600MEP-2 thermostat: Status Display,
Main User, and Installer Configuration Menus.
The Status Display Menu is displayed during normal
thermostat operation. The menu continually scrolls
through the following parameters:
Room Temperature
Day and Time
System Mode
Schedule Status (Occupied/Unoccupied)
Configuration
Key

Advertisement

loading