Advertisement
Programming the Daily Schedule – Four-Event
The schedule setting menu is used to enter the
occupied and unoccupied time periods for each day of
the week. The schedule-setting menu reflects either a
two- or four-event schedule per day based on what
was selected in the Selecting the Number of Events
(2/4event) menu during the configuring process. If the
schedule-setting menu does not reflect a four-event
schedule, return to the Selecting the Number of Events
(2/4event) menu in the configuration process and
select four events.
When changing the time, pressing the UP/DOWN
arrow keys changes the time in 1-minute increments.
Holding the keys down changes the time in 30-minute
increments.
Note: Programming one of the digital inputs to
remote NSB disables menu.
To set the time schedule for a four-event schedule,
follow the steps in Table 7.
Table 8 shows an example of a four-event office
schedule.
Table 7: Programming the
Daily Schedule – Four-Event
Press MENU from the Status
RoomTemp
Display Menu to enter the Main User
75.0°F
Menu.
Answer NO to all prompts until the
Schedule
schedule set prompt appears in the
set? Y/N
display. Press YES to enter the
scheduling menu.
Press YES to set the schedule for
Monday
Monday or NO to advance to
set? Y/N
Tuesday.
16
T600MEP-2 Programmable Economizer Thermostat Installation Instructions
Press YES to set the occupied start
Occupied
time for Monday or NO to advance
day? Y/N
to Tuesday (selecting NO leaves the
thermostat in the unoccupied mode
for the entire day).
Use the UP/DOWN arrow keys to
Occupied
set the first occupied start time.
12:00 AM
Press YES to enter the time.
Unoccup
Use the UP/DOWN arrow keys to
12:00 AM
set the first unoccupied start time.
Press YES to enter the time.
Occupie2
Use the UP/DOWN arrow keys to
set the second occupied start time.
12:00 AM
Press YES to enter the time.
Use the UP/DOWN arrow keys to
Unoccup2
set the second unoccupied start
12:00 AM
time. Press YES to enter the time.
Press YES to set the schedule for
Tuesday
Tuesday or NO to advance to
set? Y/N
Wednesday.
Press YES to copy the schedule
Copy Y/N
from the previous day. Press NO to
previous
set a different schedule.
If YES was pressed, the next prompt
Wednesda
will be for Wednesday. Repeat
set? N/A
procedure for all days of the week.
After setting the schedule for all
Exit?
days of the week, following the last
Y/N
entry for Sunday, press YES to
return to the Status Display Menu or
NO to start again at Monday.
Advertisement
