Panel Description; Switches, Controls, Keys And Connectors - Icom IC-V8 Instruction Manual

1

PANEL DESCRIPTION

' ' Switches, controls, keys and
connectors
q
w
e
r
t
y
q CONTROL DIAL [VOL]
A Adjusts the audio level.
B Selects the operating channel or adjusts the squelch level.
• The function B is available when "dial" is assigned with [VOL] in
(p. 51).
INITIAL SET MODE
w POWER SWITCH [POWER]
Push for 1 sec. to turn the power ON and OFF.
e PTT SWITCH [PTT]
Push and hold to transmit; release to receive.
1
r SQUELCH BUTTON [SQL]
t UP/DOWN KEYS [Y Y ]/[Z Z ]
u
y KEY PAD (pgs. 3–6)
Speaker
u ANTENNA CONNECTOR
i
i [SP]/[MIC] JACK
Micropho
o
o FUNCTION DISPLAY (pgs 7, 8)
Push and hold to force the squelch open and to adjusts the
squelch level with [Y]/[Z] keys.
A Selects the operating channel or adjusts the squelch level.
B Adjusts the audio level.
• The function B is available when "dial" is assigned with [VOL] in
(p. 51).
INITIAL SET MODE
Used to enter operating frequency, the DTMF codes, etc.
Connects the supplied antenna.
Connect an optional speaker-microphone or headset, if desired.
The internal microphone and speaker will not function when ei-
ther is connected.
D External connection
NOTE: When connecting or disconnecting an external speaker-
microphone, first turn the transceiver power OFF.
[SP] jack
SP (AF OUT)
REMOTE
SP GND
[MIC] jack
MIC
5 V
MIC GND
PANEL DESCRIPTION
External speaker
(Nominal impedance 8 Ω)
SP
ø3.5 mm
plug
SP
GND
External microphone
ø2.5 mm
(Nominal impedance 2k Ω)
plug
MIC
33 kΩ
MIC
GND
PTT
1
2