Specifications; Options - Icom IC-V8 Instruction Manual

14

SPECIFICATIONS

D D General
• Frequency range
USA
Asia/CSA
• Operatable temp. range
• Frequency stability
• Antenna connector
• Power supply requirement
• Current drain (at 7.2 V DC)
Transmit at 5.5 W
at 0.5 W
Receive at max. AF
Stand-by
Power saved
• No. of memory channels
• Tuning steps
• Dimensions
(projections not included)
• Weight (approx.)
D D
Transmitter
• Modulation systems
• Output power (at 7.2 V DC)
• Max. frequency deviation
• Spurious emissions
• External mic. connector
D D
Receiver
• Receiving system
• Intermediate frequencies
• Sensitivity (at 12 dB SINAD)
• Squelch sensitivity
• Selectivity
• Intermodulation rejection
• Spurious & image rejection
• Audio output power
(at 7.2 V DC)
• External speaker connector: 2-conductor 3.5 (d) mm(
57
:
144–148 MHz (Tx), 136–174 MHz* (Rx)
136–174 MHz* (Tx/Rx)
*Guaranteed 144–148 MHz range only.
: –10˚C to +60˚C; +14˚F to +140˚F
: ±10 ppm (–10˚C to +60˚C)
: BNC (50 Ω)
: 7.2 V DC (6–10.3 V DC acceptable; Icom's bat-
tery pack only)
:
Less than 2.0 A
Less than 0.7 A
Less than 250 mA
Less than 70 mA
Less than 20 mA
: 107 (incl. 1 call and 6 programmed scan edges)
: 5, 10, 12.5, 15, 20, 25, 30 and 50 kHz
: 54(W)×132(H)×35(D) mm
1 3 3
; 2 ⁄ (W)×5 ⁄ (H)×1 ⁄ (D) in
8 16 8
: 350 g; 12.3 oz (with BP-222)
190 g; 6.7 oz (without battery pack)
: Variable reactance frequency modulation
: 5.5 W (High), 0.5 W (Low)
: ±5.0 kHz
: Less than –60 dB
"); 2.2 kΩ
1
: 3-conductor 2.5 (d) mm ( ⁄
10
: Double conversion superheterodyne system
: 1st: 21.7 MHz, 2nd: 450 kHz
: 0.16 µV typ.
: 0.1 µV typ.
: 65 dB typ.
: 65 dB typ.
: 75 dB typ.
: More than 0.3 W at 10% distortion with an
8 Ω load
"); 8 Ω
1
⁄
8
D D BATTERY PACKS
Battery Voltage Capacity
Pack
BP-208* 2 Battery case for R6 (AA)
×6 alkaline or Ni-Cd cells
BP-209 7.2 V 1100 mAh
BP-210 7.2 V 1650 mAh
BP-222 7.2 V 600 mAh
* 1 Operating periods are calculated under the following conditions:
Tx:Rx:standby=5:5:90, power save function: auto setting, is activated
* 2 Operate with the LOW output power selection is recommended.
D D CHARGER
• BC-144 (#11) + BC-145
DESKTOP CHARGER
For rapid charging. Charging time: 1.5 to 2 hrs.
• BC-137 (#11) + BC-122
BATTERY CHARGER
For regular charging. Charging time: 15 hrs.
• BC-146 + BC-147
BATTERY CHARGER
For regular charging. Charging time: 18.5 hrs.
• BC-121 - + AD-94 (#11)
MULTI CHARGER
For rapid charging of up to 6 battery packs simultaneously.
Charging time: 1.5 to 2 hrs.
• BC-119 + AD-94 (#11)
DESKTOP CHARGER
For rapid charging of battery packs. Charging time: 1.5 to 2 hrs.
D D INTERNAL UNIT
• UT-108
DTMF DECODER UNIT
Provides pager and code squelch capabilities.
D D OTHER OPTIONS
• HM-54/HM-46L/HM-75A/HM-131L
• HM-128L -
EARPHONE MICROPHONES
• HS-51
HEADSET
• MB-68/MB-74
BELT CLIPS
• CS-V8 + OPC-478
CLONING SOFTWARE
For memory contents programming by PC editing.
• OPC-474
CLONING CABLE
For cloning between transceivers.
• SP-13
EARPHONE
15

OPTIONS

Output Operating
Power Period*
5.5 W —
5.5 W 7.5 hrs.
5.5 W 11 hrs.
5.5 W 4 hrs.
AC ADAPTER
AC ADAPTER
.
AC ADAPTER
(6 pcs.)
CHARGER ADAPTER
CHARGER ADAPTER
-
SPEAKER MICROPHONES
CLONING CABLE
1
58