5
8.6 HOW TO UPDATE USB
Preparation
Expand the image-file folder for USB updating in the root directory of the USB memory device.
Example: Folder construction after expansion in the root directory of the USB memory device
(With the nonencrypted
folder)
(With the encrypted folder)
Description of the figures
Screen ON
LED
Panel screen ON
LED lit
Procedures
1. Setting before USB updating
Change the power status of the Panel from Screen ON to AC OFF.
1
Panel screen ON
LED
Unplug the AC power cord.
2
AC OFF
LED
2. Performing USB updating
Connect the USB memory device then set the
unit to AC ON.
3
AC OFF
LED
Connect the USB memory
device.
4
AC OFF
LED
Plug in the AC power cord.
If you use any key on the remote control unit in Steps 5 and 7:
If the unit does not shift to Step 8, disconnect the USB memory device
then try the procedures from the beginning.
If the unit shifts to Step 8, continue the updating procedures as described.
5
6
[update]
boot.img
update.ctl
update.iso
update.lst
[update]
An encrypted image-file folder for USB updating
boot.img
will be released for general users.
update.ctl
update.enc
update.key
update.lst
Status
AC OFF
LED
AC (ON)
Panel screen OFF
LED unlit
PDP-5020FD
6
7
USB
memory
AC (OFF)
device
LEDs flashing alternately
5
Panel screen ON
LED
6
Orange LED ON
LED
7
System standby
LED
8
Performing USB updating
LED
7
8
Performing USB updating
LED
NEVER use the remote
control unit.
(Especially DO NOT use
the Power key.)
179
8
A
B
C
D
E
F