Functions When Entering The Service Factory Mode; Fuctions Whose Setting Are Set To Off; User Data - Pioneer PDP-5020FD Service Manual

1
A

[3] FUNCTIONS WHEN ENTERING THE SERVICE FACTORY MODE

Fuctions whose setting are set to OFF

The settings for the following functions are set to OFF when Service Factory mode is entered
(including when the "FAY" command is received) :
Function
2-Screen Operation
FREEZE
Auto size, Side Mask
B
ORBITER, Mask control
Sleep Timer
Room light sensor
Blue LED dimmer
Setting of Parental Control
Power Control
Image Position
Note: Enter the factory after cancelling ACI because the ACI operation setting OFF and not done.
C

User data

User data will be treated as follows :
• User data on picture-quality and audio-quality adjustments are not reflected, and factory-preset data are output
(user data will be retained in memory). When the unit enters Service Factory mode, the current audio-quality adjustment
data will be still be retained in memory.
• User-setting data will be applied to the various settings (items on the menus), signal formats, and the items that are
associated with path change (HDMI settings, etc.).
D
• Data on screen (i.e., screen position; meaning clock dividers, and not including data on screen size).
Are reset to the default values (data stored in memory will be retained).
Screen size will be retained.
E
F
112
1
2
Input function set on the main side is selected.
It is not performed during Factory mode.
Central value operation (ORBITER)
Cancel the operation.
Turn off the detecting operation (Setting data will be retained.)
Turn off the operation (Setting data will be retained.)
When this is turned off, the block of the screen is released.
Turn off the operation (However, the setting maintains it.)
Central value operation
PDP-5020FD
2
3
Remarks
3
4
4