Zte R1010 User Manual page 87

1. Tab the on the Today screen, or tap
Manager to open the wireless manager.
2. Tap Wi-Fi on the Wireless Manager screen to turn on/off the Wi-Fi connection.
GPRS/3G
Use GPRS/3G (or EDGE, if available) to connect to the Internet and to send and receive
MMS messages on your device. You will need a data plan to use your wireless service
provider's GPRS/3G network. Check with your wireless service provider to find out about
GPRS/3G rates.GPRS/3G settings are already preconfigured on your device, and your
device is ready to use your wireless service provider's GPRS/3G services. Do not change
the settings as this may cause services to stop working.
Add a new GPRS/3G Connection
Before you begin, get the following information from your network service provider:
Access point name
•
Your user name and password if needed.
•
Server IP and the port number if the network uses a proxy server.
•
Server type (HTTP, WAP, Secure WAP, Socks) if the network uses a proxy server.
•
1. Tap >Settings>Connections tab >Connections > Advanced tab.
2. Tap Select Networks.
87
> Settings > Connections tab> Wireless