Table of Contents
Advertisement
33
Disconnect the charger when the battery is fully charged.
Figure 7
Power On/Off Your Phone
Make sure that your (U)SIM card is in your mobile phone and the battery is charged.
Hold the Power Key to power on/off the phone. The phone will automatically search for
the network after it is powered on.
When you first power on your R1010 after you purchase it or reset it to factory (see
Setting Up Your Device- Basic Settings-Reset to Factory Settings), you need to
calibrate the screen (see Setting Up Your Device- Basic Settings- Calibrate the
Screen) and select your time zone (see Setting Up Your Device- Basic Settings-Set the
time and date).
Note: You may need to enter the PIN (Personal Identification Number) code if you have
enabled the (U)SIM PIN. (See Setting Up Your Device- Setting Up Security-Secure the
(U)SIM Function-Enable the (U)SIM PIN.)
Advertisement
Table of Contents
