Table of Contents
Advertisement
Network Settings
Network Settings consists of the Wired LAN and Wireless LAN pages.
Wired LAN
The Wired LAN page allows you to modify the Wired LAN settings.
•
DHCP Get Auto: If the projector is in a DHCP environment, set this setting to On
to obtain the IP address provided by the DHCP server. Set this setting to Off if you
want to configure the wired LAN settings manually.
Wireless LAN
The Wireless LAN page allows you to modify the wireless LAN settings.
•
The Point to Point Settings (AP) table will be blank if the projector is not installed
with the BenQ WDRT8192 USB wireless dongle.
•
Wireless LAN Radio: Allows you to reset the power for RF dongle.
•
SSID: Allows you to modify the projector's ID for quick identification over the
wireless network. The SSID has a maximum length of 13 alphanumeric characters.
38
Managing the projector using a web browser
Advertisement
Table of Contents
