Network Display Code; Mirror Off / Mirror On - BenQ M73 Series Operation Manual

Network Display Code

If you are the first user (the host) connected to the projector, when you tap the Mirror
Off/On button to mirror your computer screen on the projector, a password prompt will
display requesting a password. You will need to enter the Network Display Code to
start mirroring. The Network Display Code is displayed at the upper right corner of the
Network Display screen.
• If the Network Display screen is not shown on the projector, press SOURCE on the
projector and then select Network Display to view the screen.
• Subsequent users (the guests) do not have to enter the Network Display Code to join the
session. However, their projection requests must be approved by the host. See
page 21

Mirror Off / Mirror On

You can switch between Mirror Off and Mirror On by tapping the Mirror Off / Mirror
On button. This button will not be displayed on devices running iOS.
Icon
If you are the first user and you click the Mirror Off / Mirror On button to switch to Mirror On,
a password prompt will appear. See
for details.
Name
Mirror Off When Mirror Off is displayed, your screen is not
mirrored on the projector.
Mirror On When Mirror On is displayed, your screen is
mirrored on the projector, allowing other users can
see your screen.
"Network Display Code" on page 27
Description
Projecting via QCast (for mobile devices)
"Preference" on
for details.
27