5.
If the projector successfully connects to the wireless network, a message will appear
instructing you to reconnect the projector. When this message appears, turn off
QCast and reconnect your computer to the projector and re-launch QCast.
For confirming if the projector is connected to the wireless network, you can re-enter the Network
Setup in QCast and check if the wireless network's SSID is displayed.
Remote Control
When you click Remote Control on the Advanced panel, a virtual keypad appears. It
allows you to control the projector as if using the physical keypad on the projector.
20
Projecting via QCast (for PCs)