Table of Contents
Advertisement
Management
The Management page allows you to name the projector for quick identification and set
a password to protect the projector's configuration.
•
Projector Device Name: Allows you to name the projector.
•
Web Control Lock:
•
When set to Off (default), users are allowed to access the BenQ Projector
Control System and change the projector's configuration.
•
When set to On, users can only review the Information page. An admin
password will be required to enter other function control pages.
•
Web Admin Account Name Change: Allows you to change the admin account
name. The default account name is admin.
•
Web Admin Password Change: Allows you to change the admin password. The
default admin password is 0000.
•
Record the new admin password if you change the admin password. If the admin password is
lost, you must contact BenQ Customer Center to make an unlock request.
•
Web Admin Account Name and Web Admin Password can only be changed when Web
Control Lock is set to On.
Alternatively, you can also enable the Web Control Lock using the projector's OSD
menu:
1.
Press MENU on the projector.
2.
Highlight Settings and press OK.
3.
Highlight Security Settings and press OK.
4.
Highlight Web Control Lock and set it to On.
Once Web Control Lock is set to On, you cannot set the Web Control Lock to Off via the
projector's OSD. To set Web Control Lock to Off, you need to have the admin password and
reset Web Control Lock to Off via the BenQ Projector Control System.
Managing the projector using a web browser
37
Advertisement
Table of Contents
