Connecting Your Computer To The Projector Via A Wired Connection - BenQ M73 Series Operation Manual

Your projector is now connected to your local area network and can be accessed by any
devices linked to the same local area network.
Alternatively, to check the IP address of the projector, make sure the projector is connected to the
network, and press SOURCE on the projector and then select Network Display. The IP address
is displayed on the bottom left corner of the Network Display screen.
Connecting your computer to the projector via a wired
connection
Follow the steps below to connect your computer to the projector through the local area
network:
1. Ensure the projector is connected to the local area network. You can enter the
Wired LAN page to check if the IP Address, Subnet Mask, Default Gateway,
and DNS Server are configured as needed and if the Status is Connect.
2. Connect your computer to the same local area network via an RJ45 cable.
Now your computer and the projector are on the same local area network.
Your computer should be properly configured to detect a wired network connection. Check the
user manual of your computer or visit the manufacturer's website for information on how to
configure a wired network connection.
Preparation 7