Accessing The Internet With A Wireless Connection; Accessing The Internet Via Qcast; Accessing The Internet Via Projector Osd - BenQ M73 Series Operation Manual

Accessing the Internet with a wireless
connection
When a wireless network is set up for your projector as described in the
connections
lack internet access. You can obtain Internet access for the network either via QCast or
the projector's OSD menu options.
Laptop computer
Smartphone

Accessing the Internet via QCast

1. Make sure the projector is installed with BenQ WDRT8192 USB wireless dongle and
a wireless network is set up for the projector. See
the projector" on page 8
2. Make sure your computer or mobile device is connected to the wireless network
created by the designated USB wireless dongle. See
mobile device to the projector wirelessly" on page 9
3. Launch QCast. Go to the Network Setup page in the Advanced menu and
configure the network settings. See
page 19

Accessing the Internet via projector OSD

1. Press MENU on the projector.
2. Highlight Network and press OK.
3. Highlight Wireless LAN and press OK.
4. Highlight Client and press OK.
5. Highlight Network (SSID) and press OK.
6. Select a wireless network with Internet access and press OK.
7. Enter the password for the wireless network.
8. Highlight Commit and press OK.
9. Return to the Client page. Check if the Status is Connect and the SSID of the
desired wireless network is displayed. If so, the projector is connected to the desired
wireless network.
10. Connect your computer or mobile device to the projector.
40

Accessing the Internet with a wireless connection

section, connections to the projector by your computer or mobile device will
Tablet
for details.
for details.
Wireless Dongle
Projector
"Setting up a wireless network for
"Accessing the Internet via Network Setup" on
Wireless
Internet
Wireless LAN
"Connecting your computer or
for details.