Powered Usb Connection; Cable Connections Using The Full-Function Base - VeriFone V240m Installation Manual

Powered USB
Connection
NOTE
WARNING
Cable Connections
Using the Full-
Function Base
A PoweredUSB cable allows for devices to obtain power through their USB host
instead of requiring an independent power supply or external AC adapter.
Connect the cable (VPN CBL282-033-01-A) to the V240m and plug the male USB
connector into the corresponding USB port of the connecting device.
Figure 13 Connecting to USB-Based Host via Powered USB
There are two variants of PoweredUSB, one with 12 V DC output and another with
24 V DC. The V240m only supports 12 V DC option.
Incorrect power sequence may degrade the SoC Host port.
To connect the terminal to other devices via Ethernet, RS-232, and USB, use the
V240m Full-Function (FF) Base. The FF Base provides a standard RJ-45 LAN
socket, RS-232 port, a mini-USB port. The V240m terminal must be docked on the
base to utilize cable connectivity
Figure 14 Full-Function Base, Front and Rear View
S
Cable Connections
V240 I G
M NSTALLATION UIDE
ETUP
19