Avaya BCM50 User Manual page 54

Rls 6.0 system start up

Hide thumbs Also See for BCM50:

Table of Contents

BCM50 System Start Up

2. View the Provision Loops tab and check that the required lines are

provisioned by clicking each line, and change the setting if necessary.

3. There are no module-specific settings for BRI modules.

4. The module should now be Enabled.

Use the following procedure to configure the BRI loop type, i.e. S or T and

also the Clock Source settings for the BRI loops.

1. Open Telephony, then Loops.

2. Select the Loop to configure.

NN40010-318 Issue 1.2 BCM50 Rls 6.0

Table of Contents