Avaya BCM50 User Manual page 51

DPNSS Module-Specific Settings
Attribute
Clock Source
Host node
DPNSS Local
Number Length
NN40010-318 Issue 1.2 BCM50 Rls 6.0
Value Description
Primary Designates whether the DTM/BRI acts as a
Secondary primary or secondary timing component for an
Timing Master external timing source or as the internal timing
source.
programmed with primary/secondary clock
source, however, it is recommended that a
BRI module always be set to Internal if a DTM
exists on the system to be the Primary
External clock source.
M1 DPNSS cards connected to Embark switches
Embark have a different way of handling call diversion,
IDPX therefore, when you provision a DTM for
DSM DPNSS, you must indicate what type of switch
the lines are connected to.
When you select the Embark switch, calls are
diverted using the Call Forwarding feature
instead of call diversion.
1-10 This number allows the system to determine
how many digits to read on an incoming call to
determine that the call is meant for this
system.
BCM50 System Start Up
Note: A BRI module can be
51