Avaya BCM50 User Manual page 22

BCM50 System Start Up
Use the following procedure to load a Keycode file.
1. Access Element Manager (refer to Element Manager Connection to
the BCM section of this guide).
2. In Element Manager, click on the Configuration tab, open the System
folder and click on Keycodes.
3. To load a keycode file, click on the Load Keycode File button.
Note: For new un-configured BCM systems, the Status fields will state IDLE
and the Data fields will show a value of 0.
4. Browse to the location of the file and select it. Click Open.
22 NN40010-318 Issue 1.2 BCM50 Rls 6.0