Avaya BCM50 User Manual page 23

Rls 6.0 system start up

Hide thumbs Also See for BCM50:

Table of Contents

5. The features will be applied and viewable in the Feature Licenses

table.

6. If you prompted to reboot the BCM after entering the keycode file

select the Administration tab followed by Utilities, Reboot and then

click the Reboot button.

Note: The feature status change in the keycodes panel may take up to one

minute to display depending on the system load and component response.

You can refresh the keycode window to see the feature status change, after

adding the keycode file, by selecting the refresh button in Element Manager.

Some keycodes require the BCM to be rebooted.

NN40010-318 Issue 1.2 BCM50 Rls 6.0

BCM50 System Start Up

Table of Contents