Avaya BCM50 User Manual page 29

Rls 6.0 system start up

Hide thumbs Also See for BCM50:

Table of Contents

1. From the Configuration tab, open the Data Services folder, and

select DHCP Server.

2. Select the General Settings tab. It is normally selected by default.

3. Configure the DHCP server attributes as required.

4. The BCM does not automatically create an address range of IP

Addresses for allocation to DHCP clients. If the BCM is to be

configured as a DHCP server (for IP Phones only or all devices) you

will need to create an address range. Click on the Address Ranges

tab.

NN40010-318 Issue 1.2 BCM50 Rls 6.0

BCM50 System Start Up

Table of Contents