Avaya BCM50 User Manual page 48

BCM50 System Start Up
Trunk Port Details tab
Port d etails
3. Both trunk and analog station modules show port details. Ports settings
are directly related to the physical ports into which the PSTN lines or
telephony devices connect on the media bay modules.
Attribute Value
Port # Read-only

These are the port numbers of the physical device.
Device Read-only
type

This is the type of module.
Line # 00X-XXX
The number of lines depends on the module type.
Call Idle
State or Active
State Deprovisioned
This field indicates whether a module line or DN is in use or even provisioned.
Version <read-only>
This field indicates the version of firmware running on the module.
DN XXXX
Each port supports one telephone, hence, one DN record.
Addons
48
CTM/GATM4 CTM/GATM8
Module type
All modules
All modules
Combo DTM- DTM-
T1 PRI
All modules
All modules
All modules
NN40010-318 Issue 1.2 BCM50 Rls 6.0
BRI-
T
ASM/GASM DSM